Once we had made the decision to go Orange and Teal I made a larger model 1:12 scale as this would give a more realistic view in addition to being easier to make the stripes. For the stripes I acquired a small sheet of Vinyl that is used for car wraps. I then painted it Metallic Teal. I did find that it was not easy, with my painting skills to get an even coverage, so I ran a brush across the wet paint. It did make an interesting finish that I thought may be good for the final job.
Having made and painted a 1:12 scale larger model in the Orange I cut some thin paper to approximately the size of the stripe, wet it and laid it on the model allowing the water to stick it in place. Once it was dry I drew over it exactly where the stripe would be I had a good template. With this I cut out the white Vinyl and stuck it to the model. Note when doing this don't stick it on dry, add a bit of water, even with a little detergent to allow you to slide the vinyl into place and push out the bubbles. I then did the same with the Teal and laid it over the white. With a little trimming with a sharp scalpel. I was happy with the job. All I had to do was wait for the full sized toy.
I was out with Jenny and my daughter Sophie at a cafe when I picked up a motoring magazine. In it was a picture of a Maserati in a spectacular metallic green. I thought that this was what I was looking for, so I visited a paint supplier who, by coincidence, I knew from church. Car Paint Shop He explained how the paint has "flip" that changes the paint's apparent colour depending upon the viewing angle. Nathan Mixed up some paint for me and sent me on my way. (He has a paint shop that you can hire if you want.)
Another 1:12 scale car was made and stripes attached with a subtle difference to the Orange car. (Spot the difference.)
